Virtual COM Port Drivers Virtual COM Port Drivers for Ross-Tech USB Interfaces Older Ross-Tech RS-232 Serial interfaces can be set to power up as 'dumb K-Line pass through' interfaces. This allowed those old Serial interfaces to be compatible with a wide variety of third-party applications which expect a 'K-line pass-through' serial interface. However, our USB interfaces present additional challenges. Early in their development, we found a number of technical advantages to using a 'direct' USB driver which bypasses the Windows Serial drivers entirely. Hence the USB drivers that ship with VCDS do not emulate a serial COM port and cannot be used with applications that expect to communicate via a serial port. NOTE: The following applies to our legacy USB interfaces (HEX-USB, KII-USB and HEX-USB+CAN). It does NOT apply to our current HEX-V2 or HEX-NET interfaces.

Opendiagpro elm 1 6 10. Jun 3, 2013 - vag k can commander 1.4 is VAG Diagnostic tool via Can and K-line. Donlgle Driver -> in folder 'Dongle Driver USB' start file 'inf_inst.exe'.

These new interfaces do not use a USB UART chip and cannot be be used for 'dumb K-line pass-through'! In order to facilitate the use of third-party applications which expect to communicate with a serial interface, drivers that emulate a COM port are available. However, anyone thinking about using them needs to be aware of the following points: • We do not offer installation support for these drivers. They should be used only by someone who is competent/comfortable installing (and possible uninstalling) USB drivers on his PC.

• We cannot offer any support for third-party software, nor any guarantee that it will work correctly with these drivers. Of course, the same would apply with a serial interface as well. That said, here some installation notes: • These drivers are compatible with Windows 2000 and newer. They should work with W2K, XP-32, XP-64, Vista-32 and Vista-64. We do not have any VCP drivers for Windows 98! • Unzip the contents of the download into a new folder. • With an interface plugged in, find it in Device Manager, right-click it, and select Update Driver.

Hi Lucinda, Welcome to the mulberry forum. As Madmadmo says earlier bags didn't have serial numbers, though I am figuring as you've trying to check a number this bag has one. There is no official database for numbers unfortunately, and whilst certain numbers do crop up regularly as fakes, it is possible that the numbers listed were copied from an original genuine. This is a quick warning to anyone who is considering buying a Mulberry handbag on ebay. If you see the numbers 254571, 026904, 565321 and 262541 on any bags then they are fake bags. Mulberry serial number check. The serial number on the counterfeit Mulberry bag below is actually a common number used in many replicas. In addition, the counterfeit disc is deeply engraved, rather than lightly laser etched like the authentic one on the left. Mulberry serial numbers are 100% UNIQUE. So if you Google Mulberry + the serial number of your bag, then no other bag with the same number should appear. If there are matches, it’s very likely that your bag is fake.

• Depending on what drivers your system already has installed, you may have to 'force' these by telling the wizard not to search, but to let you specify what driver to install, then doing the Have Disk and Browse thing. • There's also the possibility that the Virtual COM Port won't install automatically. We've found no real pattern why it does on some systems and not on others.

If it does not, find the interface in Device > Manager. The name should show '. Open the properties sheet, click the Advanced tab, and make sure Load VCP is checked.

Once checked, disconnect and re-connect the interface. • Once the USB Serial Port is installed, you may need to change the COM Port Number (depending on how high a number the applications supports). Device Manager, Properties sheet for the USB Serial Port, Port Settings tab, Advanced button. The COM Port Number may change if you plug the interface into a different USB port, so I'd recommend always using the same USB port.

• VCDS should continue to work fine with these drivers installed. Leave VCDS set to USB, not a Virtual COM Port! Assuming you've read and understand all of the above, you can download the 'Virtual COM Port' drivers here: Virtual COM Port Drivers Unless otherwise noted, all content on this site is Copyright (c) 2000-2017 by Ross-Tech LLC.

All rights reserved. 'VCDS', 'VCDS-Mobile' and 'HEX-NET' are Registered Trademarks of Ross-Tech, LLC. Ross-Tech is not affiliated with the Volkswagen Group in any way.

Vag k can commander 1.4 is VAG Diagnostic tool via Can and K-line protocol. Is vag Odometer Correction Tool via can and k-line base vag cars. Vag commander k can 1.4 can read flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories. VAG K+CAN Commander 1.4 VAG K+CAN 1.4 Commander Here OBD2Repair share with you VAG K+CAN Commander Full VAG-K+CAN Installation Guide.

Driver installation 1.1. Donlgle Driver -> in folder 'Dongle Driver USB' start file 'inf_inst.exe' 1.2. Interface USB driver -> in folder 'Interface Driver USB/Executable' start file 'CDM_Setup.exe' 2. Software installation place folder 'VAG-K+CAN Commander' at usful for you place 3. Connect USB dongle to your PC 4.

Connect interface to your PC 5. If your operation system is Windows XP - skip this step Check proper setting of the USB-COM port Your interface is detected from Windows like COM port (USB-COM). You must check whether setting of CURRENT port are proper. From 'My Computer->properies->hardware->device manager->Ports (COM&LPT)->USB Serial Port (COM x)' select properties (right mouse button) then 'Port Settings->Advanced'. Your value for 'Latency Timer (msec) should be 1! If not set to 1.